Aquatuff 25Ltr – Unitor

Aquatuff 25Ltr – Unitor

Unitor™ Aquatuff™ is a heavy-duty water based alkaline cleaner. It has numerous cleaning applications including removal of greases, waxes, vegetable and animal oils, sludge, soot, carbon deposits, dirt and grime. It is a highly concentrated alkaline cleaner that is free from hydrocarbon solvents and biodegradable.

General Cleaning – Deck and Engine Room
Unitor™ Aquatuff™ can be used for different types of cleaning, and it can be applied by brush, hand spray, high- and low pressure washing machines etc. It can be applied on vertical surfaces by adding Unitor™ Foam-Agent™ (Product no. 614537) for increased resident time. Dependent on degree of contamination typical dosage is about 1-5%. For safe handling and optimal dilution we recommend the use of the UNITOR™ MIXING STATION 4-14.

Removal of soot from Inert Gas Systems (IGS)
Apply Unitor™ Aquatuff™ with a Unitor™ High Pressure Cleaning Machine and use 1:4 with water. However, if used with a hand sprayer, apply the product neat on the surfaces, allowing 1 litre per 12m2.
Leave for about 30-45 minutes. The surface remains wet.
Wash down with hot water (80°C) and check the results.
Repeat the procedure if necessary.

Cargo Hold Cleaning
Unitor™ Aquatuff™ can be used for cargo hold cleaning after soot, coal, pet coke and other bulk materials.
If Unitor™ Slip-Coat™ (Product no. 652 737015 and 652 737023) is applied to the cargo hold surfaces prior to loading, the concentration of Unitor™ Aquatuff™ in the cleaning solution may be reduced.

FEATURES:
Highly concentrated
Does not contain nonylphenol ethoxylates or other estrogenic compounds
Biodegradable
Free from hydrocarbon solvents
Aquatuff is most suitable for removal of wax deposits
It has numerous cleaning applications including removal of grease, vegetable & animal oil, soot & general dirt & grime
Approved by Marinfloc AB for use in engine rooms
Removal of soot deposits from inert gas systems
Very effective and economical in use
Completely safe on epoxy coatings

DOSING METHOD
Apply Unitor™ Aquatuff™ mixed 10–25% in water, using spray foam equipment.
Leave for 30–45 minutes. The surface remains wet.
Wash down with a high pressure unit. For best results, direct the high pressure jet at the lowest parts of the hold first and work upwards.
Repeat the procedure if necessary.

APPROVALS
This composition meets the criteria for not being harmful to the marine environment according to MARPOL Annex V and may be discharged into the sea when used to clean cargo holds and external surfaces on ships.
Approved by Marinfloc AB for use in engine rooms
Nordic Swan eco-labelled.

Invent Hazard Material (IMO/EU) classification C-49
Not Compatible The concentrated product may react with aluminium, zinc, tin and their alloys.