Commissioning Cleaner 25Ltr – Unitor

Commissioning Cleaner 25Ltr – Unitor

Unitor™ Commissioning Cleaner™ is an innovative multifunctional water based cleaner that removes scale, rust, oil and grease in one step. Unitor™ Commissioning Cleaner™ is for cleaning of new boilers and cooling systems on board new buildings. It will remove scale, rust, oil and grease at the same time from the systems. The product is recirculated through the system, using an external circulation pump. Use the dosage 5-10% solution depending on the grade of contamination.

FEATURES:
Water based multifunctional cleaner
Biodegradable
Does not contain nonylphenol ethoxylates or other estrogenic compounds
Cleaning of new systems for mill scale, rust, oil etc.
No need of neutralization chemicals afterwards
Cleans water systems with light scale and a thin oil film
Provides a temporary protection against corrosion by passivation
Safe on aluminium, zinc, tin and their alloys
Quick separation of oil after cleaning

USAGE:
Drain system to be cleaned if necessary.
Inspect as completely as possible to determine the extent of contamination and general condition of system.
Fill with fresh water.
Add a solution 5-10% strength of Unitor™ Commissioning Cleaner™.
Circulate through the system for 5 to 8 hours at the maximum temperature allowed by the system.
Drain system complete and flush thoroughly the entire system and all compounds with fresh water until effluent is clear.
Reinspect to determine results of the cleaning process.
If unsatisfactory, repeat steps 3 through 7.
Refill system with distillate or good quality fresh water and dose the required amount of cooling or boiler water treatment.
Test system on a regular basis to insure chemical residuals are maintained with specific limits

Invent Hazard Material (IMO/EU) classification C-49
pH 8,5-9,0 in 20% solution
Product no. 664 737189 – is recommended to be used.