FUSIONMASTER EHF350 with Standard Metric Reducing Liner Set
Available on backorder
EHF350
Suitable for 355-110mm diameter pipe
- Robust and compact – Heater, Facer and hydraulic power unit attached to the machine frame for minimal setup time and prevention of lifting injuries.
- Designed for low maintenance – tough and reliable for field or factory.
- Joints rapidly prepared with the powerful hydraulically driven Facer.
- The electric hydraulic controls enable pre-setting of pressures for each weld phase, ensuring consistent weld pressures and quality control.
- Self-centring Fittings Chuck – simple way to hold stub flanges.
- Unique pipe alignment mechanism overcomes pipe diameter mismatch.
- Heater provides controlled uniform surface temperature.
- Heater achieves working temperature in approximately 20 minutes.
- Replaceable non-stick Cloth system for Heater plate reduces production downtime.
- Available with detachable wheel base.
- Reducing Liners available for pipe and fittings.
Download FUSIONMASTER HF 350 Data Sheeet.
$ 33,669.99
Available on backorder
Related products
-
Welding and Fasteners
Ardrox 9D1B [HF-D] Solvent Based Developer – Box of 10
Ardrox 9D1B Solvent-based penetrant developer
ARDROX 9D1B is a suspension of an inert white powder in a quick drying solvent. It has a low sulphur, halogen and alkali metal content. ARDROX 9D1B can be used with any of the ARDROX range of visible and fluorescent penetrants.
Batch certification is available on request.
Chemicals required
- ARDROX 9D1B
- ARDROX 9PR5 penetrant remover
- ARDROX 996PB visible penetrant
Method of use
After suitable pre-cleaning, penetrant application, penetrant removal and drying of the components, ARDROX 9D1B is applied to the components by spraying.
As ARDROX 9D1B is a suspension of finely divided powder in a solvent, it is essential that containers of the product are thoroughly agitated to disperse the settled powder completely before use.
The material should be sprayed to give an even thin white film over the entire surface to be inspected. After application of the developer, the components must be left in contact with the product for a minimum period of 10 minutes. The components are then inspected under conditions of good lighting for red penetrants and a UV lamp for fluorescent penetrants.
Effects on materials
ARDROX 9D1B has no effect on most common materials of construction. It is safe to use on steel, aluminium, brass, bronze, copper, magnesium, cadmium plate and titanium. Some plastics and rubbers may be softened by prolonged contact with this material hence it is advisable to check before using specific grades of these.
Technical information
- Appearance: White powder in clear colourless liquid.
- Density: 0.88 g/ml at 20°C.
- Flash Point: -18°C (Closed Cup).
- These are typical values only and do not constitute a specification.
Equipment materials
Equipment/tanks should be constructed of stainless steel.
Safety guidance
Before operating the process described it is important that this complete document, together with any relevant Safety Datasheets, be read and understood.
Labour and environmental protection
All local and national regulations on the transport, storage, use and waste treatment of chemicals in concentrated or diluted form and as working solutions must be obeyed.
Further specific information on the products can be found in the EC Safety Data Sheets supplied. The user should also pay strict attention to information and hazard symbols shown on product labels.
Waste disposal
All waste waters must be treated in accordance with national legislation and local regulations prior to discharge to the sewer.
Ardrox-9D1B.pdf
SKU: 35190 -
Welding, Welding and Fasteners, Welding Machine
MIller Maxstar 200 str Welding Machine. (ME380334L) 120 – 460VAC 50/60HZ.
Welding, Welding and Fasteners, Welding MachineMIller Maxstar 200 str Welding Machine. (ME380334L) 120 – 460VAC 50/60HZ.
Maxstar(R) 200 STR DC Stick/TIG. Provides maximum flexibility by automatically connecting to any input power while maintaining DC stick/TIG welding performance. Auto-Line(TM)(TM) allows for any input voltage hook-up from 120 – 460 V, single- or three-phase with no manual linking.
SKU: ME380334L -
Gas Welding Equipment, Welding, Welding and Fasteners
Shank Type 5
Part No.1256723
Type 5 Shank must be used with either a mixer for welding, or a cutting attachment for cutting.
Key Features:
- Unique aluminium alloy gun drilled handle specially shaped for comfort and lightness with strength and reliability
- Parallel torqued inlet fittings with filters for maximum safety and durability
- Totally encapsulated trim valves for precise gas control
- Heavy chrome finish for maximum wear resistance
- Welds between 1-25mm
SKU: shank-type-5-1256723 -
Welding and Fasteners
EHF350 Facer (BF350200)
Features
- Robust, reliable and low maintenance.
- Electric hydraulic power pack enables pre-setting of 3 independent pressures.
- Unique pipe alignment mechanism overcomes pipe diameter mismatch.
- Wheels removable for trench work.
- Easy one man operation.
- Joints rapidly prepared with the powerful multi speed Facer.
- Self-centring Fittings Chuck – simple way to hold stub flanges.
- Heater provides controlled uniform surface temperature.
- Heater achieves working temperature in approximately 15 minutes.
- Replaceable non-stick Cloth system for Heater plate reduces production downtime.
- Reducing Liners available for pipe and fittings.
(The HF350 manual hydraulic pump version is also available).
Download FUSIONMASTER EHF350 Flyer.
SKU: 35134
![Ardrox 9D1B [HF-D] Solvent Based Developer – Box of 10](https://i0.wp.com/klloyds.com/shop/wp-content/uploads/2020/12/1.123638Ardroxndt2.jpg?resize=448%2C280&ssl=1)
