Available on backorder
$ 75.56
Available on backorder
The ATEX Phoenix Contact UK 5 N, grey, feed-though terminal block has been designed for universal use. Having a universal foot makes it easy to mount onto NS 35 and NS 32 DIN rails.
• Compact design helps you save space
• ATEX approved
• Screw connection with M3 thread
• Easy to use
E Exei/II; KEMA
Moeller PKZM0-6.3 Manual Motor Protector – standard 35mm DIN rail mounted and is adjustable from 4-6.3 AMPS – Class 10 protection (unit trips in 10 seconds or less) – rotary ON/OFF handle and screw terminals
Hempel Thinner 08450 are perfect for use with the Hempadur range of marine coatings and can also be used to clean any painting tools.
Best Uses
Hempel Thinner 08450 is specifically designed to be used with the Hempadur range of coatings. Hempel Thinners 08450 can also be used to clean up brushes and other painting tools as well as surfaces where paint may have splashed.
Application
Hempel Thinner 08450 can be mixed in with the Hempadur range of paints and coatings which is usually based on a percentage rate of 5-10%.
Surface and Environment
Hempel Thinner 08450 can be used on the same surfaces that the Hempadur range has been specified that they can be applied on to such as structural steel and marine surfaces.
VpCI-368 is a fast drying, solvent-based temporary coating that provides protection in harsh, outdoor, unsheltered applications yet is easily removed with alkaline cleaners such as VpCI®-414. Provides multi-metal protection. Can be matched to some custom colors.
Commercial equivalent to MIL– PRF – 16173E (Grades 1 & 2); NATO 6850-66-132-5848, 6099; NSN 8030-00-062-6950, 231- 2345, 244-1300, 470-2601.
Download Safety Data Sheet
WEG Automation CWB Series Three Pole Contactor to 38A (AC3) or 50A (AC1) for a Power Circuit to be switched by a 110V AC Control Circuit.
Rating:-
– Motor DOL Starter (AC3): 38A for a 18.5kW motor x 400V.
– Inverter or DC Thyristor Drive supply (AC1 – Thermal): 50A for up to 22kW x 400V.
Size 3: 55mm Wide x 118mm Deep x 89mm High. IP10.
Front-mounting external Auxiliary Contact adds 29mm to depth when fitted.
Side-mounting external Auxiliary Contact adds 11.5mm to width when fitted.
Mounting: 35mm DIN rail or 4 x 4.5mm slots at rear on 44.98mm x 50-79mm centres.
Terminals: Screw type. Max 16mm².
Weight: 0.65kg
Current Rating: 40A (AC3) or 50A (AC1)
Maximum Voltage: 690V 50/60Hz 1-3 Phase
Coil Voltage: 110V AC 50/60Hz x 98VA (pull-in), 6.6-12.3VA (sealing)
Main Contacts: 3 (NO)
Auxiliary Contacts, 1 x Normally Open (External, Front-mount). 1 x Normally Closed (External, Front-mount). Provision for 4 x additional external auxiliary contacts, see linked products below.
Standards: IEC/EN 60 947. DIN VDE 0660. UL. CSA
Lifespan (Electrical): 1,200,000 operations.
Lifespan (Mechanical): 10,000,000 operations.
Note:-
– AC1 Current Rating is for use with applications where open and closing operations are current free and the Current rating is not exceeded at any time.
– AC3 kW Rating is based on standard 2 pole or 4 pole motors.
– Coil connections can be made at either the top or bottom of the contactor to simplify replacement of existing contactors.
Select at least 2 products
to compare
RS PRO Natural Nylon Cable Tie, 300mm x 4.8 mm 
LC1D65A3F7 Contactor, 3 Pole, 110VAC Coil 
Hempel Thinner 08450 - 20 Litres 
