-
×
Parker Kittiwake FGK1200PA OIL ANALYSIS VISCOMETER (HEATED)
1 × $ 19,033.75
Subtotal: $ 19,033.75
Clamp
Stainless St. w/ 650mm handle horiz & vertical move
Availability:
Available on backorder
- Holding capacity up to 1680 lbs (7,5 kN)
- Heavy Duty horizontal clamps with high strength and long life.
- Low height design
- Many equipped with DESTACO Toggle Lock Plus®, an innovative safety feature that adds a secondary lock to the clamp to help ensure that the over-center locking condition is maintained and protected against unintentional opening.
- Low silhouette hold down clamp features a handle that can be operated from either side or from behind
- The unique standard design gives greater hand clearance between the bar and handles, providing optimal overhead clearance.
$ 75.56
Available on backorder
Related products
-
Equipment And Supplies, Equipments
Parker Kittiwake FGK1200PA OIL ANALYSIS VISCOMETER (HEATED)
OIL ANALYSIS VISCOMETER(HEATED)
- Replaces Kittiwake FG-K1-200-KW
- Monitoring viscosity gives an early warning for potential fluid issues.
- Highly accurate results with two readings are available at 40°C, 50°C or 100°C.
- Test an even greater range of oils, by changing the viscosity index or density.
- Estimate the combustion performance (CCAI) of fuel oil.
- Heavy duty, robust equipment – ideal for long term use with fast and accurate results.
SKU: FGK1200PA -
Electricals, Switches and Circuit Breakers
WEG CWB38 40A 18.5kW/22kW 3 Pole Contactor 1NO+1NC 110V AC Coil CWB38-11-30D13
Electricals, Switches and Circuit BreakersWEG CWB38 40A 18.5kW/22kW 3 Pole Contactor 1NO+1NC 110V AC Coil CWB38-11-30D13
WEG Automation CWB Series Three Pole Contactor to 38A (AC3) or 50A (AC1) for a Power Circuit to be switched by a 110V AC Control Circuit.
Rating:-
– Motor DOL Starter (AC3): 38A for a 18.5kW motor x 400V.
– Inverter or DC Thyristor Drive supply (AC1 – Thermal): 50A for up to 22kW x 400V.Size 3: 55mm Wide x 118mm Deep x 89mm High. IP10.
Front-mounting external Auxiliary Contact adds 29mm to depth when fitted.
Side-mounting external Auxiliary Contact adds 11.5mm to width when fitted.
Mounting: 35mm DIN rail or 4 x 4.5mm slots at rear on 44.98mm x 50-79mm centres.
Terminals: Screw type. Max 16mm².
Weight: 0.65kgCurrent Rating: 40A (AC3) or 50A (AC1)
Maximum Voltage: 690V 50/60Hz 1-3 Phase
Coil Voltage: 110V AC 50/60Hz x 98VA (pull-in), 6.6-12.3VA (sealing)
Main Contacts: 3 (NO)
Auxiliary Contacts, 1 x Normally Open (External, Front-mount). 1 x Normally Closed (External, Front-mount). Provision for 4 x additional external auxiliary contacts, see linked products below.
Standards: IEC/EN 60 947. DIN VDE 0660. UL. CSA
Lifespan (Electrical): 1,200,000 operations.
Lifespan (Mechanical): 10,000,000 operations.Note:-
– AC1 Current Rating is for use with applications where open and closing operations are current free and the Current rating is not exceeded at any time.
– AC3 kW Rating is based on standard 2 pole or 4 pole motors.
– Coil connections can be made at either the top or bottom of the contactor to simplify replacement of existing contactors.SKU: WEG-CWB38 -
Paint
Hempel Hempadur 85671
Colour 50900 Light Red
Hempel Hempadur 85671 is a two-component, amine adduct cured phenolic epoxy (novolac) tank and pipeline coating with very good adhesion and high temperature, water and chemical resistance.
Best Uses
Hempel Hempadur 85671 is formulated for use as an interior lining in tanks, pipelines, railcars etc. for hot water, brine, crude oil, vegetable oils and other chemicals as per the Chemical Resistance Guide, ONLY shades 11150 and 50900. ALL other shades including Aluminium (19000) can ONLY be used as an external coating for the protection of insulated (CUI) and uninsulated process pipework and vessels including cryogenic conditions.Service Temperatures
In crude oil: Maximum: 130°C/266°F
In vegetable oils: Maximum: 60°C/140°F
In water (maximum gradient 15°C/27°F): 95°C/203°FSKU: 50900-85671 -
Electricals, Tools & Testers
Fluke 190-504/UN/S Oscilloscope – Universal Version
Key features
- Four electrically isolated inputs
- CAT III 1000 V / CAT IV 600 V safety rated
- Choose from 60 MHz, 100 MHz, 200 MHz or 500 MHz bandwidth models
- Fast sampling rate, up to 5 GS/s with up to 200 ps resolution (Depending on model and channels used)
SKU: fluke190-504 -
Paint
INTERNATIONAL INTERTHANE 990 – RAL1004 – Golden Yellow
International Interthane 990 is a two component, high build, acrylic polyurethane finish giving excellent durability & long term recoatability.
International Interthane 990 is a typical recommendation where there is a requirement for a long term, durable finish to be applied over a high performance anti-corrosive system.
Suitable for use in both new construction & as a maintenance finish which can be used in a wide variety of environments including industrial, marine offshore structures, chemical and petrochemical plants, bridges, pulp and paper mills, and in the power industry.
SKU: RAL1004
