-
×
Cortec VpCI-368
1 × $ 55.70
Subtotal: $ 55.70
Clamp
Stainless St. w/ 650mm handle horiz & vertical move
Availability:
Available on backorder
- Holding capacity up to 1680 lbs (7,5 kN)
- Heavy Duty horizontal clamps with high strength and long life.
- Low height design
- Many equipped with DESTACO Toggle Lock Plus®, an innovative safety feature that adds a secondary lock to the clamp to help ensure that the over-center locking condition is maintained and protected against unintentional opening.
- Low silhouette hold down clamp features a handle that can be operated from either side or from behind
- The unique standard design gives greater hand clearance between the bar and handles, providing optimal overhead clearance.
$ 75.56
Available on backorder
Related products
-
Hydraulics
SKF TMHP 10E Hydraulic Jaw Puller Kit
SKF TMHP 10E Hydraulic Jaw Puller
Mounting
Small and medium size bearings are generally cold mounted. Traditional methods can cause forces to be transmitted through the rolling elements, resulting in damage to the raceways. SKF’s mechanical mounting tools help prevent bearing damage during cold mounting.
Dismounting
Choosing the right puller for the dismounting job is critical. The puller type, and its maximum withdrawal capacity are crucial for completing any dismounting job safely and easily. SKF offers a complete range of easy-to-use mechanical, hydraulic and hydraulically-assisted bearing pullers for use in many bearing applications.
- A versatile kit with three different arm lengths is suitable for a wide range of applications
- Hydraulic spindle facilitates effortless dismounting
- Self-locking arms minimise the risk of the puller slipping from the application when under load
- The spring-loaded centre point of the hydraulic spindle allows easy puller centring
- The hydraulic spindle is equipped with a safety valve, which minimises the risk of puller overload
- High load rating of 100 kN (11.2 US ton) makes the puller suitable for a variety of dismounting jobs
- A hydraulic spindle stroke of 80 mm (3.1 in.) helps facilitate dismounting in one operation
- Supplied with hydraulic spindle extension pieces to allow quick adaptation to pulling length
SKU: skftmhp10e -
Equipment And Supplies, Equipments
Parker Kittiwake FGK1200PA OIL ANALYSIS VISCOMETER (HEATED)
OIL ANALYSIS VISCOMETER(HEATED)
- Replaces Kittiwake FG-K1-200-KW
- Monitoring viscosity gives an early warning for potential fluid issues.
- Highly accurate results with two readings are available at 40°C, 50°C or 100°C.
- Test an even greater range of oils, by changing the viscosity index or density.
- Estimate the combustion performance (CCAI) of fuel oil.
- Heavy duty, robust equipment – ideal for long term use with fast and accurate results.
SKU: FGK1200PA -
Electricals, Switches and Circuit Breakers
WEG CWB38 40A 18.5kW/22kW 3 Pole Contactor 1NO+1NC 110V AC Coil CWB38-11-30D13
Electricals, Switches and Circuit BreakersWEG CWB38 40A 18.5kW/22kW 3 Pole Contactor 1NO+1NC 110V AC Coil CWB38-11-30D13
WEG Automation CWB Series Three Pole Contactor to 38A (AC3) or 50A (AC1) for a Power Circuit to be switched by a 110V AC Control Circuit.
Rating:-
– Motor DOL Starter (AC3): 38A for a 18.5kW motor x 400V.
– Inverter or DC Thyristor Drive supply (AC1 – Thermal): 50A for up to 22kW x 400V.Size 3: 55mm Wide x 118mm Deep x 89mm High. IP10.
Front-mounting external Auxiliary Contact adds 29mm to depth when fitted.
Side-mounting external Auxiliary Contact adds 11.5mm to width when fitted.
Mounting: 35mm DIN rail or 4 x 4.5mm slots at rear on 44.98mm x 50-79mm centres.
Terminals: Screw type. Max 16mm².
Weight: 0.65kgCurrent Rating: 40A (AC3) or 50A (AC1)
Maximum Voltage: 690V 50/60Hz 1-3 Phase
Coil Voltage: 110V AC 50/60Hz x 98VA (pull-in), 6.6-12.3VA (sealing)
Main Contacts: 3 (NO)
Auxiliary Contacts, 1 x Normally Open (External, Front-mount). 1 x Normally Closed (External, Front-mount). Provision for 4 x additional external auxiliary contacts, see linked products below.
Standards: IEC/EN 60 947. DIN VDE 0660. UL. CSA
Lifespan (Electrical): 1,200,000 operations.
Lifespan (Mechanical): 10,000,000 operations.Note:-
– AC1 Current Rating is for use with applications where open and closing operations are current free and the Current rating is not exceeded at any time.
– AC3 kW Rating is based on standard 2 pole or 4 pole motors.
– Coil connections can be made at either the top or bottom of the contactor to simplify replacement of existing contactors.SKU: WEG-CWB38 -
Fitness, General
Jordan Fitness Premium Rubber Dumbbells – 1KG
Great-value rubber dumbbells featuring our classic design, this versatile dumbbell suits commercial, boutique gyms as well as home users.
- Used for bodybuilding, CrossFit, functional training as well as standard strength dumbbell exercises
- Stylish rubber solid ends with chrome contoured handle
- Known, industry-wide for leaving zero damage to gym benches and flooring
- New, improved design is available in a variety of sets between 1-10kg, 2-20kg and individual pairs from 2.5kg and 50kg (2.5kg increments)
- One-year warranty
Sets available
- 1-10kg (1kg increments / 10 pairs) 2-20kg (2kg increments /10 pairs)
- 2.5-50kg (2.5kg increments / 20 pairs)
SKU: jordan1kg -
Electricals, Switches and Circuit Breakers
LADN20 Contact Block
Auxiliary contact block 2 NO/0 NC LADN20 – Schneider Electric – 3389110383881: Auxiliary contact block 2 NO/0 NC Number of contacts as change-over contact 0, Number of contacts as normally open contact 2, Number of contacts as normally closed contact 0, Type of electric connection Screw connection, Model Top mounting
SKU: LADN20
