Outlets and Accessories
Giant Horseshoe Magnet 210mm
Giant Horseshoe Magnet 210mm
Giant-sized, powerful, horseshoe magnet in durable plastic.
Ideal for younger children, the North and South poles are clearly marked and housed at the end.
- Pack size: Single
- Length:210 mm
- Age Range: Suitable for 5 to 11 years
Welding and Fasteners
Ardrox 9D1B [HF-D] Solvent Based Developer – Box of 10
Ardrox 9D1B Solvent-based penetrant developer
ARDROX 9D1B is a suspension of an inert white powder in a quick drying solvent. It has a low sulphur, halogen and alkali metal content. ARDROX 9D1B can be used with any of the ARDROX range of visible and fluorescent penetrants.
Batch certification is available on request.
- ARDROX 9D1B
- ARDROX 9PR5 penetrant remover
- ARDROX 996PB visible penetrant
Method of use
After suitable pre-cleaning, penetrant application, penetrant removal and drying of the components, ARDROX 9D1B is applied to the components by spraying.
As ARDROX 9D1B is a suspension of finely divided powder in a solvent, it is essential that containers of the product are thoroughly agitated to disperse the settled powder completely before use.
The material should be sprayed to give an even thin white film over the entire surface to be inspected. After application of the developer, the components must be left in contact with the product for a minimum period of 10 minutes. The components are then inspected under conditions of good lighting for red penetrants and a UV lamp for fluorescent penetrants.
Effects on materials
ARDROX 9D1B has no effect on most common materials of construction. It is safe to use on steel, aluminium, brass, bronze, copper, magnesium, cadmium plate and titanium. Some plastics and rubbers may be softened by prolonged contact with this material hence it is advisable to check before using specific grades of these.
- Appearance: White powder in clear colourless liquid.
- Density: 0.88 g/ml at 20°C.
- Flash Point: -18°C (Closed Cup).
- These are typical values only and do not constitute a specification.
Equipment/tanks should be constructed of stainless steel.
Before operating the process described it is important that this complete document, together with any relevant Safety Datasheets, be read and understood.
Labour and environmental protection
All local and national regulations on the transport, storage, use and waste treatment of chemicals in concentrated or diluted form and as working solutions must be obeyed.
Further specific information on the products can be found in the EC Safety Data Sheets supplied. The user should also pay strict attention to information and hazard symbols shown on product labels.
All waste waters must be treated in accordance with national legislation and local regulations prior to discharge to the sewer.SKU: 35190
This non-destructive testing technique, also known as liquid penetrant inspection (LPI), is a cost-effective method used to locate surface breaking flaws such as cracks, porosity, laps, seams and other surface discontinuities. Dye penetrant inspection can be applied to both ferrous and non-ferrous materials and all non-porous materials (metals, plastics or ceramics).
It is commonly used to detect defects in castings, forgings and weldments. Intertek works with all industry sectors including aerospace, power generation, petrochemical and oil and gas, and we can provide dye penetrant inspection on-site at our customer’s premises or at our accredited laboratories. In the laboratory, dye penetrant inspection is particularly suitable for the inspection of batch quantities of machined parts, and components up to one tonne in weight and two metres in diameter can be accommodated at our UKAS-accredited laboratory in the UK.
The method is also useful for testing on-site as it is portable, and when applying certain techniques such as visible colour contrast there is no need for additional resources such as electricity or water. This makes it a highly convenient for inspecting surface discontinuities.SKU: 35187
Stainless St. w/ 650mm handle horiz & vertical move
- Holding capacity up to 1680 lbs (7,5 kN)
- Heavy Duty horizontal clamps with high strength and long life.
- Low height design
- Many equipped with DESTACO Toggle Lock Plus®, an innovative safety feature that adds a secondary lock to the clamp to help ensure that the over-center locking condition is maintained and protected against unintentional opening.
- Low silhouette hold down clamp features a handle that can be operated from either side or from behind
- The unique standard design gives greater hand clearance between the bar and handles, providing optimal overhead clearance.
Quartz parting and annealing Basket QBR-49 – 117x117x70
Quartz parting & annealing baskets for 49 samples, which allow to carry out the successive parting and gold annealing operations in the same container, and substitute, both parting flasks, and gold annealing crucibles.
These quartz parting & annealing baskets for 49 samples are capable of withstanding:
- Attack of concentrated nitric acid
- High temperature necessary for annealing (up to 1000ºC)
- Thermal shock due to very low coefficient of thermal expansion.
They are therefore suitable for simultaneously processing the two nitric acid attacks (the first with nitric acid 33%, the second with nitric acid 49%) and then go directly in the gold annealing furnace (after rincing with water).
The quartz thimbles are provided with thin slits to evacuate the nitric acid / distilled water and possess a flange at the top to fit the holes of the basket.
It is possible to supply them as spares in case of breakage. There are two types of quarz thimbles/crucibles and they suit most cornet sizes.SKU: 35181
55032943 SENSOR ASSEMBLY ETA- 2 WEEKS
- Number of connectors:3
- Fitting Depth [mm]:27
- Resistance M[ohm]:13
- ERA:Sensor, camshaft position
- Item number:5503294 3
- Our price:29,21 £
- Manufacturer part number:55032943
- EAN number:000005503292
- Condition New
- Use number: ERA 55032943
AVAYA 1608I IP TELEPHONE
The Avaya 1608i IP Telephone is designed for the everyday user. Everyday users typically rely on several forms of communication including voice and email – and while they require a quality telephone, they rarely receive more that five or six calls per day.
- The 1608i IP Phones are ideal for enterprises and call centers alike, and can be deployed alongside other Avaya phones. The 1600 Series IP Deskphones combine the features of traditional and IP desk phones, delivering capabilities often found in higher-priced devices.
- For employees accustomed to traditional digital telephones, these models offer a familiar user interface—including context-sensitive displays and fixed keys for conference, transfer, and hold. These phones work with the Avaya Aura® Platform and the Avaya IP Office™ Platform.
- Give users easy-to-read status information. All models feature backlit displays, high-quality full-duplex speakerphones, and buttons with dual LEDs (red and green) that give users easy-to-read status information.
Need to know more? View Avaya’s latest Data Sheet
Avaya 1600 Series IP PhoneSKU: 35175
Greenworks G40PSH Cordless 40v Pole Saw & Long Reach Hedge Trimmer with Battery
- EASY TO START – Insert 40 V battery and get started: With the battery pruner and hedge trimmer you can immediately start gardening freely and without cables – battery and charger are not included
- PRACTICAL 2-IN-1 SOLUTION – Make gardening easier with the pruning saw and telescopic hedge trimmer in one – switching between the two tools is quick and requires no additional tools
- HEDGE TRIMMER – Equipped with a 7-position articulated knob for optimal alignment a robust sword with 51 cm length and a cutting thickness of 18 mm for an even cut
- TELESCOPIC CHAINSAW – Thanks to a sword length of 20 cm, an electric chain brake, and a maximum length of the telescope of 2.4 m, even high branches, and twigs are easily accessible from the ground
- ONE BATTERY FOR ALL – The Greenworks 40 V batteries from 2 Ah up to powerful 4 Ah are versatile and compatible with many Greenworks products in the garden and workshop range
Manufacturer Greenworks Part Number 1300607 Product Dimensions 27.5 x 129 x 15.5 cm; 7.5 Kilograms Item model number 1300607 Colour Green Style Tool only (No battery & no charger) Pattern Single Power Source Battery Powered Voltage 40 Volts Item Package Quantity 1 Number Of Pieces 1 Blade Length 51 Centimetres Speed 3000 RPM Measurement System Metric Included Components 1 Pole saw, 1 Hedge trimmer Batteries Included? No Batteries Required? Yes Item Weight 7.5 kg
ASIN B01AY88OGY Best Sellers Rank 60,651 in DIY & Tools (See Top 100 in DIY & Tools)
8 in Outdoor Power Tool Chargers
66 in Hedge Trimmers
91 in Grass Trimmers
Date First Available 22 Jan. 2016SKU: 35173
Office and School Supplies
Precision Table Top, 60 x 37 1/2″” Model # 3952
Function with precision. The Precision 60″W x 37 1/2″D Drafting Table Top features a non-glare green laminate finish and smooth edges, making it a great work surface to be at the top of your game. Constructed of durable 3/4″ thick furniture-grade compressed wood with melamine laminate finish. Provides height and angle adjustment when combined with Safco Products Precision Table Base Model 3962GR (sold separately).
Item Weight 70 pounds Product Dimensions 37.5 x 60 x 1 inches Item model number 3952 Is Discontinued By Manufacturer No Assembled Height 1 inch Assembled Width 60 inches Assembled Length 37.5 inches Weight 77 Pounds
ASIN B003554134 Best Sellers Rank #2,092,434 in Home & Kitchen (See Top 100 in Home & Kitchen)
#6,254 in Home Office Desks
Date First Available July 26, 200SKU: 35171
Office and School Supplies
Precision Drafting Table Base Model # 3962GR
Industrial-grade steel table with stabilizing bars. 1 locking tool drawer; dimensions: 12-1/2Wx29-3/4″D. 1 reference drawer; Dimensions: 38Wx28x4″D. Boards are sold separately (#3952, #3953) and tilt up to 50. Grey. Base dimensions: 35-1/2Hx56-3/8Wx30-1/2″D. Manufacturer’s limited lifetime warranty
Manufacturer SAFCO PRODUCTS CAN Brand Safco Item Weight 99 pounds Package Dimensions 58.5 x 35.5 x 9 inches Item model number SAF3962GR Color Grey Material Type Metal Number of Drawers 1 Manufacturer Part Number 3962GR
ASIN B00Q4L6J7W Best Sellers Rank #587,922 in Office Products
#209 in Conference Room Tables
Date First Available November 25, 2014SKU: 35169
Multimeters and Accessories
55171073 PANEL METER
Designed for harsh environments, these panel meters are is ideal for use in field test equipment or in laboratory environments where chemicals or liquids are present. The metal case gives complete magnetic isolation for steel panel mounting where stray magnetic fields can induce errors in readings.
Specifications & Description
- Max Temperature (° C)35
- Min Temperature (° C)-10
- Control Input VDC1-5
- Display Type3.25″ analog dial
- Max Operating Temperature (° F)149
- Min Operating Temperature (° F)-4
- Overall Width (in)3 1/4
- Overall Height (in)3 1/4
- Overall Depth (in)2 1/2
- Overall Width (mm)82.6
- Overall Height (mm)82.6
- Overall Depth (mm)63.5
- DescriptionPanel Meter, -10-35°C, 1-5 VDC Input
88652829 BALL JOINT
Manufacturer Moog Brand MOOG Item Weight 1.2 pounds Product Dimensions 5.5 x 3.3 x 2.9 inches Item model number 88652829 Is Discontinued By Manufacturer No Exterior Smooth Manufacturer Part Number 88652829 OEM Part Number 88652829SKU: 35160
OIL ABSORBENT MAT
The Armor All oil spray mat protects your garage floor from leaks and spills. The absorbent fabric contains leaks and the waterproof underside prevents moisture and oil from seeping through. Our patented Drymate material absorbs and contains liquids and wicks away moisture. The waterproof layer stops engine oil, brake fluid, gasoline, coolant, and prevents these fluids from soaking through. The non-slip underside holds the oil mat securely in place and prevents it from slipping. If your oil mat gets dirty, just scrub with soap, hose off and hang dry. Do not bleach. This mat is reusable, durable and easy to clean. Made in the USA. For best results, place the oil mat under the car to protect the garage surface. Be proactive, not reactive.
- Is Discontinued By Manufacturer: No
- Product Dimensions : 149.86 x 76.2 x 0.33 cm; 521.63 Grams
- Date First Available: 10 July 2019
- Manufacturer: Armor All
- ASIN: B07FK4YMVK
- Item model number: AAOSM3060C
REQUIRED SPILL KIT FOR OIL | 56L2172 Ecospill 25L Sustainable Oil Spill Kit
Made from renewable natural fibres, these oil absorbents combine outstanding absorbency rates with excellent environmental credentials. Oil absorbents provide a response to oil spillages in the workplace and are manufactured with hydrophobic properties meaning they absorb oil only and not water. The kit is supplied in a reusable plastic caddy.
• Oil spill kit supplied in a convenient caddy
• Absorbs up to 25L
• Absorbents made from natural fibres from renewable sources
• Spun-bond laminated layers add strength
• Complies with ISO 14001 credentials in environmental management
• For use with oil and other hydrocarbon-based liquids
• Spill kit contents:
– 17 oil pads
– One oil sock (1.2m)
– Two oil pillows
– Two waste bags and ties
– Instruction leafletSKU: 35143
Equipment And Supplies
M1200VC BOX OF 10 MOULDED DISPOSABLE FOLDING HALF-MASKS FFP2 WITH VALVEBox of 10 non woven synthetic fibre disposable masks FFP2. Moulded mask. Nose clip for adjustment. Foam edge under nose clip. High performance exhalation valve. DOLOMIA optional test for longer continuous wear time.FFP2 NR DMask: non-woven synthetic.
Straps : RubberRef. : M1200VCData SheetSKU: 35141