Aim-TTi Digital Bench Power Supply 420W, 1 Output 0 → 42V 0 → 10A WITHOUT CALIBRATION – EX4210R
Available on backorder
EX-R Series Single, Dual and Triple Output PSUs
The EX-R series of compact mixed-mode regulated power supplies offers output power from 175 → 420W. The models have high resolution four digit meters and switchable remote sense terminals.
Mixed-mode regulated with linear final regulation
Constant voltage or constant current with automatic crossover
4 digit meters with 10mV and 1mA resolution
Switchable remote sense terminals for perfect regulation at the load
DC output switch enables voltage/current setup without load connected
Safety terminals accept fixed shroud 4mm plugs plus forks and wires
Silent fan-free convection cooling all models except EX2020R & EX4210R (intelligent fan cooling)
$ 1,527.64
Available on backorder
EX Series: EX355P
Opto-isolated RS-232 interface
Front panel controls can be locked out
The EX355P is a digitally controlled version of the EX355 with an isolated RS-232 interface. It offers a low cost solution for a basic programmable PSU, and will be sufficient for many applications where the sophistication and complexity of GPIB are not needed. A simple command set allows remote control of voltage, current and output along with read-back of metering values and operational status. Local control is via three rotary encoders providing rapid and accurate setting of voltage and current.
EX752M Digital Multi-mode Dual Output PSU
Separate voltage and current meters for each output
Safety output terminals
EX-R Series Dual and Triple Output PSUs EX354RD & EX354RT
Switchable remote sense terminals for perfect regulation at the load
EX354RT has auxiliary output of 1.5V to 5V at 5A
Approvals
EN61010-1 (Safety) and EN61326 (EMC)
Supplied with
user manual and mains lead
| Attribute | Value |
| Output Voltage | 0 → 42V |
| Output Current | 0 → 10A |
| Number of Outputs | 1 |
| Type | Digital |
| Power Rating | 420W |
| Supply Voltage | 115 V ac, 230 V ac |
| Number of Displays | 2 |
| Input Connector | IEC 320 |
| Output Connector | Binding Post Terminal |
| Minimum Temperature | +5°C |
| Maximum Temperature | +40°C |
Related products
-
DIN Rail Power Supplies, Electricals, Power Supply
PKZM0-6.3 – Moeller MPCB 4-6.3A Rotary Type
Moeller PKZM0-6.3 Manual Motor Protector – standard 35mm DIN rail mounted and is adjustable from 4-6.3 AMPS – Class 10 protection (unit trips in 10 seconds or less) – rotary ON/OFF handle and screw terminals
SKU: PKZM06.3 -
Electricals, Power Supply
Phoenix Contact QUINT-PS/ 1AC/24DC/10/CO Switch Mode PSU 85 – 264V ac Input Voltage, 24V dc Output Voltage, 10A
Electricals, Power SupplyPhoenix Contact QUINT-PS/ 1AC/24DC/10/CO Switch Mode PSU 85 – 264V ac Input Voltage, 24V dc Output Voltage, 10A
Phoenix Contact QUINT POWER – Power supplies
The range of QUINT POWER from Phoenix contact are superior power supplies that provide a seamless experience as they’re feature-packed with all necessary requirements and more. These power supplies maximise the availability of your plant by utilizing technologies such as NFC (Near field communication) so you can quickly configure these supplies from a smartphone, SFB (Selective Fuse breaking), 6-times nominal current for 12ms, extended life range of over 500,000 hours and super-reliable start in difficult loads with a static power reserve (POWERBOOST).
These brilliant power supplies are designed to be mounted onto a DIN rail and contain screw connections for your cables. Not to mention, these PSU’s (Power supply unit) features a preventative function monitoring that allows the device to report on critical statues before any errors occur.
Switch Mode – Phoenix Contact Single Phase and Three phase Power Supplies
SKU: 8727634 -
DIN Rail Power Supplies, Electricals, Power Supply
WEG MPW40 Motor Protective Circuit Breaker 1.6A to 2.5A MPW40-3-D025
DIN Rail Power Supplies, Electricals, Power SupplyWEG MPW40 Motor Protective Circuit Breaker 1.6A to 2.5A MPW40-3-D025
WEG Automation MPW40 Series 1.6A – 2.5A Motor Protective Circuit Breaker. Provides short-circuit (magnetic) and motor overload (thermal) protection for a standard AC Motor. DIN rail mounting (optional lugs for direct panel mounting also available).
Size: 45mm Wide x 85mm Deep x 95mm High
Weight: 0.36kgMaximum Voltage: 690V 50/60Hz, suitable for 400V 3 phase motor rated between 1.6A and 2.5A
Trip: 1.6 – 2.5A (adjustable). Must be adjusted to the current rating of the motor.
Terminals: Screw Type, X2 M4 20mm Phillips
Temperature compensation
Trip Indicator
Start lever can be locked in the OFF position with a padlock if required.SKU: wegmpw40 -
Electrical Test Equipment, Laboratory and Medical Equipment, Power Supply, Lab Supplies, Test Instruments and Equipment
Power Supply, Dual Range, DC, 0-35 Vdc, 0-10A – B&K Precision 1744A
Electrical Test Equipment, Laboratory and Medical Equipment, Power Supply, Lab Supplies, Test Instruments and EquipmentPower Supply, Dual Range, DC, 0-35 Vdc, 0-10A – B&K Precision 1744A
- Coarse and fine current adjust controls
- Constant voltage or constant current
- Two current ranges
- LED indicators
For more details on product or delivery,
Please click on “add to quote”
and include your personal message.FREE DELIVERY
SKU: 10812TR04L16 -
DIN Rail Power Supplies, Electricals, Power Supply
Mean Well DR Switch Mode DIN Rail Panel Mount Power Supply with Overvoltage and Short Circuit Protection
DIN Rail Power Supplies, Electricals, Power SupplyMean Well DR Switch Mode DIN Rail Panel Mount Power Supply with Overvoltage and Short Circuit Protection
Product Details
DR-120 Series Single Output Power Supply
A range of single phase DIN Rail power supplies from Mean Well with a fanless design and wattages available between 45W and 480W.
SKU: DR-120-24
