-
×
Cortec VpCI-368
1 × $ 55.70
Subtotal: $ 55.70
Welding and Fasteners, Welding Nozzles
Nozzle No.5 3/5 Swaged Part No.122210
Availability:
Available on backorder
A quality heavy duty swaged welding nozzle for use with a heavy duty mixer.
$ 9.10
| Fuel Type | Oxygen/Acetylene |
|---|
Related products
-
Fitness, General
Jordan Fitness Premium Rubber Dumbbells – 2KG
Great-value rubber dumbbells featuring our classic design, this versatile dumbbell suits commercial, boutique gyms as well as home users.
- Used for bodybuilding, CrossFit, functional training as well as standard strength dumbbell exercises
- Stylish rubber solid ends with chrome contoured handle
- Known, industry-wide for leaving zero damage to gym benches and flooring
- New, improved design is available in a variety of sets between 1-10kg, 2-20kg and individual pairs from 2.5kg and 50kg (2.5kg increments)
- One-year warranty
Sets available
- 1-10kg (1kg increments / 10 pairs)Â 2-20kg (2kg increments /10 pairs)
- 2.5-50kg (2.5kg increments / 20 pairs)
SKU: 35728dumbbell -
Sealant Guns
Fellowes Powershred 125Ci Cross-Cut Shredder 4612101 – Shreds 20 sheets of A4 paper per pass into 4 x38mm cross-cut particles (Security Level P-4)
Sealant GunsFellowes Powershred 125Ci Cross-Cut Shredder 4612101 – Shreds 20 sheets of A4 paper per pass into 4 x38mm cross-cut particles (Security Level P-4)
Superior 100% Jam Proof Small Office Shredder With Slim Design For Shared Use.
The Fellowes 125Ci is a 3.9x38mm Cross cut shredder and is ideal for commercial use in offices of up to 5 users, shredding up to 18 sheets at a time into 3.9x38mm cross cut particles. To save energy the shredding system reduces in-use energy consumption and powers down after 2 minutes of inactivity.SKU: 125Ci -
Welding and Fasteners
FUSIONMASTER EHF350 with Standard Metric Reducing Liner Set
EHF350
Suitable for 355-110mm diameter pipe
- Robust and compact – Heater, Facer and hydraulic power unit attached to the machine frame for minimal setup time and prevention of lifting injuries.
- Designed for low maintenance – tough and reliable for field or factory.
- Joints rapidly prepared with the powerful hydraulically driven Facer.
- The electric hydraulic controls enable pre-setting of pressures for each weld phase, ensuring consistent weld pressures and quality control.
- Self-centring Fittings Chuck – simple way to hold stub flanges.
- Unique pipe alignment mechanism overcomes pipe diameter mismatch.
- Heater provides controlled uniform surface temperature.
- Heater achieves working temperature in approximately 20 minutes.
- Replaceable non-stick Cloth system for Heater plate reduces production downtime.
- Available with detachable wheel base.
- Reducing Liners available for pipe and fittings.
Download FUSIONMASTER HF 350 Data Sheeet.
SKU: 35139 -
Equipment And Supplies, Equipments
Parker Kittiwake FGK1200PA OIL ANALYSIS VISCOMETER (HEATED)
OIL ANALYSIS VISCOMETER(HEATED)
- Replaces Kittiwake FG-K1-200-KW
- Monitoring viscosity gives an early warning for potential fluid issues.
- Highly accurate results with two readings are available at 40°C, 50°C or 100°C.
- Test an even greater range of oils, by changing the viscosity index or density.
- Estimate the combustion performance (CCAI) of fuel oil.
- Heavy duty, robust equipment – ideal for long term use with fast and accurate results.
SKU: FGK1200PA -
Welding and Fasteners
Ardrox 9D1B [HF-D] Solvent Based Developer – Box of 10
Ardrox 9D1B Solvent-based penetrant developer
ARDROX 9D1B is a suspension of an inert white powder in a quick drying solvent. Â It has a low sulphur, halogen and alkali metal content. Â ARDROX 9D1B can be used with any of the ARDROX range of visible and fluorescent penetrants.
Batch certification is available on request.
Chemicals required
- ARDROX 9D1B
- ARDROX 9PR5 penetrant remover
- ARDROX 996PB visible penetrant
Method of use
After suitable pre-cleaning, penetrant application, penetrant removal and drying of the components, ARDROX 9D1B is applied to the components by spraying.
As ARDROX 9D1B is a suspension of finely divided powder in a solvent, it is essential that containers of the product are thoroughly agitated to disperse the settled powder completely before use.
The material should be sprayed to give an even thin white film over the entire surface to be inspected. Â After application of the developer, the components must be left in contact with the product for a minimum period of 10 minutes. Â The components are then inspected under conditions of good lighting for red penetrants and a UV lamp for fluorescent penetrants.
Effects on materials
ARDROX 9D1B has no effect on most common materials of construction. Â It is safe to use on steel, aluminium, brass, bronze, copper, magnesium, cadmium plate and titanium. Â Some plastics and rubbers may be softened by prolonged contact with this material hence it is advisable to check before using specific grades of these.
Technical information
- Appearance: White powder in clear colourless liquid.
- Density: 0.88 g/ml at 20°C.
- Flash Point: -18°C (Closed Cup).
- These are typical values only and do not constitute a specification.
Equipment materials
Equipment/tanks should be constructed of stainless steel.
Safety guidance
Before operating the process described it is important that this complete document, together with any relevant Safety Datasheets, be read and understood.
Labour and environmental protection
All local and national regulations on the transport, storage, use and waste treatment of chemicals in concentrated or diluted form and as working solutions must be obeyed.
Further specific information on the products can be found in the EC Safety Data Sheets supplied. The user should also pay strict attention to information and hazard symbols shown on product labels.
Waste disposal
All waste waters must be treated in accordance with national legislation and local regulations prior to discharge to the sewer.
Ardrox-9D1B.pdf
SKU: 35190
![Ardrox 9D1B [HF-D] Solvent Based Developer – Box of 10](https://i0.wp.com/klloyds.com/shop/wp-content/uploads/2020/12/1.123638Ardroxndt2.jpg?resize=448%2C280&ssl=1)
