-
×
Fellowes Powershred 125Ci Cross-Cut Shredder 4612101 - Shreds 20 sheets of A4 paper per pass into 4 x38mm cross-cut particles (Security Level P-4)
1 × $ 1,162.93
Subtotal: $ 1,162.93
Clamp
Stainless St. w/ 650mm handle horiz & vertical move
Availability:
Available on backorder
- Holding capacity up to 1680 lbs (7,5 kN)
- Heavy Duty horizontal clamps with high strength and long life.
- Low height design
- Many equipped with DESTACO Toggle Lock Plus®, an innovative safety feature that adds a secondary lock to the clamp to help ensure that the over-center locking condition is maintained and protected against unintentional opening.
- Low silhouette hold down clamp features a handle that can be operated from either side or from behind
- The unique standard design gives greater hand clearance between the bar and handles, providing optimal overhead clearance.
$ 75.56
Available on backorder
Related products
-
Laboratory and Medical Equipment
Parker FG-K16909-KW Electronic Flashpoint Tester
Electronic Flashpoint Tester
- FG-K16909-KW Electronic Flashpoint Tester
- Digital display showing test parameters, instrument status, and the flashpoint test result
- Audible alarm when flashpoint test is completed and action is required from the operator
- Automatic flash detector enhances repeatability and reduces the chance of mis-interpretation
- Small sample size – 2 or 4ml
SKU: FG-K16909-KW -
-
Sealant Guns
Fellowes Powershred 125Ci Cross-Cut Shredder 4612101 – Shreds 20 sheets of A4 paper per pass into 4 x38mm cross-cut particles (Security Level P-4)
Sealant GunsFellowes Powershred 125Ci Cross-Cut Shredder 4612101 – Shreds 20 sheets of A4 paper per pass into 4 x38mm cross-cut particles (Security Level P-4)
Superior 100% Jam Proof Small Office Shredder With Slim Design For Shared Use.
The Fellowes 125Ci is a 3.9x38mm Cross cut shredder and is ideal for commercial use in offices of up to 5 users, shredding up to 18 sheets at a time into 3.9x38mm cross cut particles. To save energy the shredding system reduces in-use energy consumption and powers down after 2 minutes of inactivity.SKU: 125Ci -
Electricals, Switches and Circuit Breakers
WEG CWB38 40A 18.5kW/22kW 3 Pole Contactor 1NO+1NC 110V AC Coil CWB38-11-30D13
Electricals, Switches and Circuit BreakersWEG CWB38 40A 18.5kW/22kW 3 Pole Contactor 1NO+1NC 110V AC Coil CWB38-11-30D13
WEG Automation CWB Series Three Pole Contactor to 38A (AC3) or 50A (AC1) for a Power Circuit to be switched by a 110V AC Control Circuit.
Rating:-
– Motor DOL Starter (AC3): 38A for a 18.5kW motor x 400V.
– Inverter or DC Thyristor Drive supply (AC1 – Thermal): 50A for up to 22kW x 400V.Size 3: 55mm Wide x 118mm Deep x 89mm High. IP10.
Front-mounting external Auxiliary Contact adds 29mm to depth when fitted.
Side-mounting external Auxiliary Contact adds 11.5mm to width when fitted.
Mounting: 35mm DIN rail or 4 x 4.5mm slots at rear on 44.98mm x 50-79mm centres.
Terminals: Screw type. Max 16mm².
Weight: 0.65kgCurrent Rating: 40A (AC3) or 50A (AC1)
Maximum Voltage: 690V 50/60Hz 1-3 Phase
Coil Voltage: 110V AC 50/60Hz x 98VA (pull-in), 6.6-12.3VA (sealing)
Main Contacts: 3 (NO)
Auxiliary Contacts, 1 x Normally Open (External, Front-mount). 1 x Normally Closed (External, Front-mount). Provision for 4 x additional external auxiliary contacts, see linked products below.
Standards: IEC/EN 60 947. DIN VDE 0660. UL. CSA
Lifespan (Electrical): 1,200,000 operations.
Lifespan (Mechanical): 10,000,000 operations.Note:-
– AC1 Current Rating is for use with applications where open and closing operations are current free and the Current rating is not exceeded at any time.
– AC3 kW Rating is based on standard 2 pole or 4 pole motors.
– Coil connections can be made at either the top or bottom of the contactor to simplify replacement of existing contactors.SKU: WEG-CWB38 -
Paint
Hempel Thinner 08450 – 20 Litres
20 Litres.
Hempel Thinner 08450 are perfect for use with the Hempadur range of marine coatings and can also be used to clean any painting tools.
Perfect for use with the Hempadur range of marine coatings and can also be used to clean any painting tools.
Best Uses
Hempel Thinner 08450 is specifically designed to be used with the Hempadur range of coatings. Hempel Thinners 08450 can also be used to clean up brushes and other painting tools as well as surfaces where paint may have splashed.
Application
Hempel Thinner 08450 can be mixed in with the Hempadur range of paints and coatings which is usually based on a percentage rate of 5-10%.
Surface and Environment
Hempel Thinner 08450 can be used on the same surfaces that the Hempadur range has been specified that they can be applied on to such as structural steel and marine surfaces.
SKU: 08450-20ltrs
